Picking up the right UPS system for industrial and IT applications is highly significant because it involves business continuity, efficient disaster recovery and safety of employees. In order to ensure maximum utilization of labor hours and control unwanted repair and replacement expenses, consider the following factors while choosing the ideal Eaton UPS system for any industrial setup.
Special requirements of a specific environment
Imagine placing the UPS system in a ship where it may be exposed to salt air or an oil exploration field in the Gulf where temperatures easily touch the 100 degree mark or a factory that is located in the seismographic zone where stability of the system is always questionable. Such rugged environments demand specific and highly stable UPS systems to withstand for a longer time. In such cases, various parameters like corrosion resistance, heat resistance and humidity control must be incorporated into the design approach of the UPS system.
The load to be supported by the UPS
Sizing the load to be supported by the UPS, the maximum load limit and the electrical properties of the load must be determined while choosing the UPS system. Additionally, it is important that all UPS systems installed to support industrial applications must have robust metering and reporting capabilities. This ensures that load-related issues are immediately reported and the impact of the changes is taken care of without delays.
Energy efficiency
Energy efficient UPS systems may be slightly more expensive than the other models, but in the long run even a minimum of 5% efficiency can contribute significantly to the overall cost savings for an industrial organization. Energy efficient UPS system installation in industrial setup is more important than in other environments as the load requirement involved is relatively very large.
Trust a manufacturer with sufficient experience
Critical industrial applications are better off when trusted with reliable vendors who offer the Eaton UPS System. The industry experience of the vendor, the guaranteed response time in case of an emergency (both at the specified location and remote assistance) must be checked for before making a final decision. Ask for options in terms of available accessories, safety features and energy storage options. When you have a reliable manufacturer taking care of the UPS system throughout its lifespan, then there is no space for worry.
Latest News
Did You Know?
Changing your UPS batteries every 4 years can prevent 90% of all UPS outages.
AC and DC capacitors have a shelf life and should be proactively changed every 8-10 years.
Adding a maintenance bypass to your UPS will allow for proper maintenance of your UPS and also re-route utility power
